{{indexmenu_n>4}}
======SWm Authorization Interface Settings======
=====Section "fast-epdg.auth"=====
^  Parameter                            ^  Description                 ^  Value                               ^
| ''iface''                            | Used interface       | [SWm][SWx]       |

**Template:**
<code bash>
fast-epdg {
	auth {
		iface = 
		swm {}
		swx {}
		s6b {}
	}
}
</code>
=====Section "fast-epdg.auth.swm"=====

^  Parameter                            ^  Description               ^  Value                               ^
| ''realm''                            | Serviced realm            | epc.mncYYY.mccXXX.3gppnetwork.org   |
| ''host''                             | Client hostname           | epdg.epc.mncYYY.mccXXX.3gppnetwork.org  |
| ''<diameter-aaa-server-name-1> {}''  | AAA Server #1 parameters  |                                      |
| ''<diameter-aaa-server-name-2> {}''  | AAA Server #2 parameters  |                                      |
| ''<diameter-aaa-server-name-n> {}''  | AAA Server #n parameters  |                                      |

**Template:**
<code bash>
fast-epdg {
	auth {
		iface =
		swm {
			realm = 
			host = 
			<server-name> {}
		}
	}
}
</code>

**Example:**
<code bash>
fast-epdg {
	auth {
		iface = SWm
		swm {
			realm = epc.mnc002.mcc250.3gppnetwork.org
			host = epdg.epc.mnc002.mcc250.3gppnetwork.org
			<server-name> {}
		}
	}
}
</code>

=====Section "fast-epdg.auth.swm.<diameter-aaa-server-name-n>"=====
^  Parameter    ^  Description             ^  Value                                                                                                                                                                                                                                       ^
| ''priority''  | Balancing priority       | 0-100                                                                                                                                                                                                                                        |
| ''local''     | Client address:port      | **IPv4:** ''x.x.x.x:p'', where  \\ ''x'' — a decimal number from 0 to 255,  \\ ''p'' — the client port  \\ **IPv6:** ''[y:y:y:y:y:y:y:y]:p'', where  \\ ''y'' — a hexadecimal number from 0000 to FFFF,  \\ ''p'' — the client port          |
| ''remote''    | AAA server address:port  | **IPv4:** ''x.x.x.x:p'', where  \\ ''x'' — a decimal number from 0 to 255,  \\ ''p'' — the AAA server port  \\ **IPv6:** ''[y:y:y:y:y:y:y:y]:p'', where  \\ ''y'' — a hexadecimal number from 0000 to FFFF,  \\ ''p'' — the AAA server port  |
| ''proto''     | Transport protocol       | [sctp][tcp]                                                                                                                                                                                                                                  |

**Template:** 
<code bash>
fast-epdg {
	auth {
		iface =
		swm {
			realm = 
			host = 
			diameter-aaa-server-1 {
				priority = 
				local = 
				remote = 
				proto = 
				tls =
			}
			diameter-aaa-server-2 {
				priority = 
				local = 
				remote = 
				proto = 
				tls =
			}
		}
	}
}
</code>

**Example:** 
<code bash>
fast-epdg {
	auth {
		iface = SWm
		swm {
			realm = epc.mnc002.mcc250.3gppnetwork.org
			host = epdg.epc.mnc002.mcc250.3gppnetwork.org
			diameter-aaa-server-1 {
				priority = 50
				local = 192.168.1.1:3868
				remote = 192.168.2.1:3868
				proto = sctp
				tls = on
			}
			diameter-aaa-server-2 {
				priority = 50
				local = 192.168.1.1:3869
				remote = 192.168.2.2:3868
				proto = tcp
				tls = off
			}
		}
	}
}
</code>