https://wiki.vasexperts.com/ 2026-04-15T05:58:38+00:00 https://wiki.vasexperts.com/ https://wiki.vasexperts.com/lib/tpl/vaswiki/images/favicon.ico text/html 2026-04-14T16:00:10+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.vasexperts.com/doku.php?id=dpi:bras_bng:bras_pppoe:pppoe_conf&rev=1776182410&do=diff PPPoE configuration and commands Enabling PPPoE support * Activate BRAS. More details. * Configure parameters in fastdpi.conf: * bras_pppoe_enable=1 — enable PPPoE. * bras_pppoe_session=10000 — set the maximum number of PPPoE sessions. Recommended value: 1.5-2 times the number of PPPoE subscribers. text/html 2026-04-14T16:00:10+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.vasexperts.com/doku.php?id=dpi:bras_bng:bras_pppoe:pppoe_management&rev=1776182410&do=diff Managing PPPoE authorization by VLAN and Service Name DPI The Service-Name tag is necessary for establishing the authorization procedure according to RFC requirements; SSG fully supports this tag in compliance with all requirements. The tag indicates that a service name follows. The text/html 2026-04-14T16:00:10+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.vasexperts.com/doku.php?id=dpi:bras_bng:bras_pppoe:pppoe_pppol2tp_parameters&rev=1776182410&do=diff Common parameters for PPPoE and PPPoL2TP Parameter Description text/html 2026-04-14T16:00:10+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.vasexperts.com/doku.php?id=dpi:bras_bng:bras_pppoe:pppol2tp_conf&rev=1776182410&do=diff PPPoL2TP configuration and commands L2TP (Layer 2 Tunneling Protocol) is a protocol for tunneling level 2 traffic through a level 3 network. L2TP is used to provide tunneling of the PPP (Point-to-Point Protocol) in your network. L2TP operation requires a LAC (L2TP access concentrator) and a LNS (L2TP network server). The LNS is one of the endpoints of the L2TP tunnel. The LAC, configured on the access device, receives packets from the remote client and forwards them to the LNS in the remote ne…