{{indexmenu_n>1}}
======Configuration of the SWu Interface======
The parameters of the SWu interface are located in the file ''/etc/fast-epdg.conf''

=====Section "fast-epdg.swu.<connection-name>"=====

^  Parameter          ^  Description                                ^  Value                                                          ^
| ''ike''            | IKEv2 protocol parameters                  | aes256-sha256-sha1-prfsha256-prfsha1-modp2048-modp1024!         |
| ''esp''            | ESP protocol parameter                     | aes256-sha256-sha1-modp2048-modp1024!                           |
| ''leftauth''       | Gateway authentication method              | eap                                                             |
| ''leftsubnet''     | Network serviced by the server             | AAA.BBB.CCC.DDD/MM, 1111.2222.3333.4444.5555.6666.7777.8888/MM  |
| ''rightauth''      | Client authentication method               | eap-diameter                                                    |
| ''rightsourceip''  | Source of destination addresses for the client gateway | [%epdg][%diameter]                                |
| ''auto''           | Action on startup                          | start                                                           |

**Example:**
<code bash>
conn epdg-eap-only
        	ike=aes256-sha256-sha1-prfsha256-prfsha1-modp2048-modp1024!
        	esp=aes256-sha256-sha1-modp2048-modp1024!
        	leftauth=eap
        	leftsubnet=10.0.0.0/8
        	rightauth=eap-diameter
        	rightsourceip=%epdg
        	auto=start
</code>