VAS Experts documentation VAS Experts documentation-mobile
in

Settings

  • Show pagesource
  • Old revisions
  • Export to PDF
  • ODT export
  • Backlinks
  • Show pagesource
  • Old revisions
  • Export to PDF
  • ODT export
  • Backlinks
    •  Stingray Service Gateway by VAS ExpertsSSG componentsFastDPI (DPI, BNG, NAT functions)Subscriber managementPolicing Management

    Table of Contents

    Policing Management

    Subscriber management is performed using the utility fdpi_ctrl.

    We recommend using Named profiles, which simplifies policing management.

    Command Syntax

    The general format of commands: 

    fdpi_ctrl command --policing policing_description_file [IP_list] [LOGIN_list]

    Explanation of command parameters:

    Parameter Description, possible values, and format Note
    command Values:
    1. load — load data
    2. del — delete. For --service, you need to specify the service_identifier
    3. list — display information for the specified IP_list or all information if the all argument is provided.     		In list and del commands, instead of an IP/LOGIN list, you can specify all, meaning the command will apply to all.
    policing_description_file A file in cfg format, e.g., tbf.cfg
    IP_list Values:
    1. --file — file with a list of IPs
    2. --ip — single IP, format: 192.168.0.1
    3. --ip_range — IP range (inclusive), format: 192.168.0.1-192.168.0.5
    4. --cidr — IP with port, format: 192.168.0.0/30, 5.200.43.0/24~ (CIDR format with excluded boundary addresses)     		Boundary addresses can be excluded from a CIDR range (following the classless addressing agreement — gateway and broadcast addresses) by adding the ~ symbol at the end of the CIDR definition, e.g., --cidr 5.200.43.0/24~.
    LOGIN_list Values:
    1. --file — file with a list of logins
    2. --login — single login, format: USER1, "FIRST_NAME LAST_NAME" (alternative for specifying a login with escaped special characters)     		"USER1" — option for specifying login in double quotes
    'USER2' — option for specifying login in single quotes
    A line starting with # is a comment.

    Examples

    1. Enable policing policy using a policing description file: 
      fdpi_ctrl load --policing tbf.cfg --ip 192.168.0.1
    2. Get a list of applied policing: 
      fdpi_ctrl list all --policing
    3. Get information for a specific IP: 
      fdpi_ctrl list --policing --ip 192.168.0.1
    4. Enable policing policy using a named profile: 
      fdpi_ctrl load --policing --profile.name tariff_10 --login kv_111